The Ultimate Installation Guide for a Nissan 350z Wide Body Kits in USA

Installing Nissan 350z Wide Body Kits 

Introduction

Installing a wide body kit is a great way to customize your Nissan 350z Wide Body Kits and make it stand out. It adds a unique look to your vehicle & can drastically improve the performance of your car. For those looking to install a wide body kit in Texas, Nevada, USA, this guide will provide step-by-step instructions on how to do so. This guide will cover the required tools and materials, the installation process, and some tips to make the installation process smoother.

Tools & Materials

Before beginning the installation process, you will need to gather the necessary tools and materials. The most essential items you will need are the Nissan 350z Wide Body Kits pieces, screws, washers, and nuts, as well as a drill and drill bits. You will also need a rivet gun for installing rivets, various pliers and wrenches for tightening screws, and a torque wrench for tightening bolts. Additionally, it is recommended to have some lubricant, a rag, and various sanding materials to help with the finishing touches of the installation.

Installation Process

1. Begin by removing the body panels from the Nissan 350z. This can be done by using a screwdriver to take out the screws at the top and bottom of each panel. Once the panels are removed, clean the area to make sure it is free of dust and debris.

2. Next, install the wide body kit pieces. Start with the front bumper, then move on to the side panels and the rear bumper. Once the pieces are in place, use the rivet gun to secure them in place.

3. Once the pieces are secured, it is time to install the screws, washers, and nuts. Use the drill and drill bits to make pilot holes in the body panels, as well as in the wide body kit pieces. Then, use the screwdriver and pliers to secure the screws and tighten the nuts.

4. Finally, use the torque wrench to tighten the bolts. This will ensure that the pieces are secure and the installation is done properly.

Tips

 Always wear safety goggles when using the drill and rivet gun.
 Take your time when drilling the pilot holes and make sure that they are in the correct location..
 Use the lubricant to help make the installation easier.
 Before securing the bolts and nuts, make sure that the wide body kit pieces are firmly in place.

Conclusion

Installing a wide body kit on a Nissan 350z can drastically improve the look and performance of the vehicle. If you are looking to install a wide body kit in Texas, Nevada, or the rest of the United States, this guide provides step-by-step instructions on how to do so. Be sure to gather the necessary tools and materials before beginning the installation process, and be sure to take your time when drilling the pilot holes and tightening the bolts. Following these instructions will ensure that your installation is done properly and will give your vehicle a unique and customized look.